ASTM A 414/A 414M-2006 压力容器用碳素钢薄板材的标准规范

作者:标准资料网 时间:2024-05-14 20:01:30   浏览:8003   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardSpecificationforSteel,Sheet,Carbon,forPressureVessels
【原文标准名称】:压力容器用碳素钢薄板材的标准规范
【标准号】:ASTMA414/A414M-2006
【标准状态】:作废
【国别】:美国
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:碳素钢;压力容器;薄板材;钢
【英文主题词】:Carbonsteels;Pressurevessels;Sheetmaterials;Steels
【摘要】:
【中国标准分类号】:H46
【国际标准分类号】:77_140_30;77_140_50
【页数】:4P;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:医用内窥镜 硬性内窥镜 第3部分:标签和随附资料
英文名称:Medical endoscopes—Rigid endoscope—Part 3:Marking and instruction manual
中标分类: 医药、卫生、劳动保护 >> 医疗器械 >> 医用光学仪器设备与内窥镜
ICS分类:
替代情况:部分代替YY 0068-1992
发布部门:国家食品药品监督管理局
发布日期:2008-10-17
实施日期:2010-06-01
首发日期:
作废日期:
主管部门:国家食品药品监督管理局
提出单位:全国光学和光学仪器标准化技术委员会医用光学和仪器分技术委员会(SAC/TC 103/SC 1)
归口单位:全国光学和光学仪器标准化技术委员会医用光学和仪器分技术委员会(SAC/TC 103/SC 1)
起草单位:国家食品药品监督管理局杭州医疗器械质量监督检验中心
起草人:颜青来、毛欣欣、贾晓航、何涛、齐伟明
出版社:中国标准出版社
出版日期:2010-06-01
页数:12页
适用范围

YY0068的本部分规定了硬性内窥镜的标签和随附资料的要求。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过YY0068的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达
成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB9706.19 医用电气设备 第2 部分:内窥镜设备安全专用要求(GB 9706.19-2000,idtIEC60601-2-18:1996)
YY0068.1医用内窥镜 硬性内窥镜 第1部分:光学性能及测试方法
YY0068.2 医用内窥镜 硬性内窥镜 第2部分:机械性能及测试方法
ISO10526:1999CIES005 色度学的CIE 标准照明体

所属分类: 医药 卫生 劳动保护 医疗器械 医用光学仪器设备与内窥镜
Product Code:SAE ARP4268
Title:Aerospace Hydraulic System Fluid Contamination - Location of Sampling Points (Cancelled Jan 1999)
Issuing Committee:A-6a1 Commercial Aircraft Committee
Scope: The scope of this Aerospace Recommended Practice (ARP) covers where, when, and how often to sample hydraulic system fluid on aerospace vehicles for particulate contamination measurements. The measurement of hydraulic fluid particulate contamination is of concern to the aerospace community because of the critical importance of hydraulic equipment reliability. Contamination is always present in the system fluid, even in new unused fluid. Contamination must be below a level that will not adversely affect system operation. This ARP draws from aerospace industry experience and practice to establish criteria for fluid contamination sampling recommendations in aerospace vehicle hydraulic systems. Fluid samples can then be subjected to measurement of particulate contamination and of other harmful contaminants such as chlorinated solvents and water.